Dx51 G550 Gi Full Hard Soft Bis with Boron Zinc Hot Dipped Coated Galvanized Steel Coil Price Factory Direct Supply Bright Finish for Roofings

• Customization: Available
• After-sales Service: 24 Hours Online
• Warranty: 10-30 Years
• Model NO.: ASTM A653/JIS/SPCC/DX51D+Z/SGCC
• Standard: ASTM, JIS, GB, AISI, DIN, BS
• Certification: ISO, RoHS, IBR
• Surface Treatment: Galvanized
• Technique: Cold Rolled
• Application: Container Plate
• Edge: Slit edge
• Stock: Stock
• Visit Factory or Not: Available
• Transport Package: by Container or by Bulk
• Specification: Zinc Zn
• Trademark: FADA STEEL
• Origin: Shandong Province, China
• HS Code: 7210410000
• Production Capacity: 400000 Tons/Year

Product Description

Product Description

Galvanized Steel Coils refers to steel sheets coated with zinc through a hot-dip galvanizing process. The zinc coating protects the steel from corrosion and provides a durable layer of protection. The size of crystallites in galvanized coating is a visible and aesthetic feature, known as spangle. Galvanizing is one of the most effective and ecnomical methods for protecting bare steel from corrosive environments. It has wide usage, like making pipes, cutting sheets, making small tools, making corrugated sheets, making container, making fences, glass curtain walls, aluminum curtain walls as columns and stress materials, or for outdoor telecommunicatins towers, highways, other open-air construction steel and etc.. For the surfaces, there is zero spangle, regular spangle. It can be produced as customers' requirements. According to different usage, there are many techniques to satisfy the demand. For example, oiled, chromated and skin passed are the normal requirements. 

Galvanized Steel Coils (GI)

Width:	700MM - 1250MM
Zinc Coating:	Z 20 - Z 275G/M^2
Thickness:	0.11MM - 2.5MM
Coil ID.:	508MM/610MM
Length:	As required
Type:	Coil/Sheet/Plate/Strip
Commercial Grade:	SGCC, DX51D + Z, ASTM A 653 CS-B
Structure Grade:	SGC340/400,G450/G550,SS37/SS40,S320GD/S350GD/S450GD

 

Detailed Photos

Surface Difference of Zero Spangle & Regular Spangle  

There are many factors affecting the size of zinc spangles. When the zinc liquid composition has the conditions for the formation of zinc spangles, the following factors will affect the size of zinc spangles:

1) Raw material: the smaller surface roughness, the thicker raw material steel plate, the bigger zinc spangle.
2) Cooling rate: the faster cooling rate, the shorter crystal growth time, the smaller zinc spangle.
3) Number of crystal nuclei: The size of zinc spangle is closely related to the number of crystal nuclei of zinc spangle. When the surface of steel base is rough or the surface cleanliness is poor, the zinc spangle is relatively small. Zinc grains are formed on steel base, and the more nuclei there is, the smaller zinc spangle will be. This principle is used in the production process of zero zinc spangles.
4) Other factors, for example, production environment, factory machines and etc..

 

Customers' Feedback

 

 

We factory has beening exporting to Africa, South America, Southeast Asia, West Asia and many regions all over the  world. All feedback are satisfied by customers. High quality products earn us good reputation. They are attracted by the high quality goods of our factoty and well after-sales service. That's why we can export a large sum of products always. That's because there are many trusted customers. We can provide 24-hours online service. If customers  face anything they can't handle, we have been always trying our best efforts to help them. 
 

Packaging & Shipping

1. Detailed pictures of package:

In order to assure the safety and to avoid rust problems, we factory use standard export seaworthy packng with waterproof paper winding, wooden cases or pallets, and PVC film via international express. Below are detailed process and pics for your reference:




1) Steps of package:
 

Step 1: The first layer of moisture-proof paper, overlap about 15 - 20cm at the contact.

Step 2: Plastic film fully wrapped.

Step 3: Outer ring 0.7mm, lining plate 0.3mm. Pure galvanized.

Step 4: Inner ring 0.8mm, 4*5 packing steel belt, gasket, packing belt clearance evenly distributed.

Step 5: Effect of side panel lining board.

Step 6: Finished, keep the whole volume clean, no handwriting, etc..

2. Detailed pictures of shipment:


 

Installation Instructions

 

Good equpiment can promise the products quality. In our factorry, we have many advanced and various equipments to assure that all performance index are according to the standard demand.

The Vickers hardness test was developed in 1921 by Robert L. Smith and George E. Sandland at Vickers Ltd as an alternative to the Brinell method to measure the hardness of materials. The Vickers test is often easier to use than other hardness tests since the required calculations are independent of the size of the indenter, and the indenter can be used for all materials irrespective of hardness. The basic principle, as with all common measures of hardness, is to observe a material's ability to resist plastic deformation from a standard source. The Vickers test can be used for all metals and has one of the widest scales among hardness tests. 
 

 

The B-UV-S is suitable for evaluating the relative durability of non-metallic materials such as paints, coatings, plastics, etc. by accelerated ageing tests with light and water exposure. It is particularly suitable for observing the destruction of physical properties of particularly durable materials, such as gloss reduction, colour fading, haze shading, strength reduction, chalking, cracking, blistering and embrittlement. It is also suitable for the food, pharmaceutical and cosmetic industries.

These equipments are just one of our factory facilities. If you want to learn more, we're always welcome you to visit our factory. We will provide well accompany to see all production lines and equipments.

 

Meetings with customers

During the past years, we have attended many fair in different countries, such as Dubai Big 5, Brazil Feicon Fair, Chinese Canton Fair, Foire internationale d'Alger, Expoperu Industrial and so much.

 

 

Company Profile

 

Shandong Fada Steel Co., Ltd. is located in Guanxian Industrial Park, Liaocheng City, Shandong Province. It mainly produces and processes Galvanized Steel Coil, Galvalume Steel Coil, Pre-painted Steel Coil, Corrugated Roofing Sheet and other high corrosion-resistant coated steel sheets. Our Company Is a Leading Manufacturer And Supplier Of Steel In China. Since 2016, Our products quality and price advantages enabled us to export to many countries and receive recognition from many customers. Our factory is a leading manufacturer and supplier of steel in China.Our products are sold in international markets such as Southeast Asia, Central and South America, Africa, etc., and have been recognized and supported by customers.
 

FAQ

1. Are you a factory or a trading company?

We are a factory that produces Galvanized Steel Coil, Galvalume Steel Coil,
Prepainted Steel Coil, and Corrugated Roofing Sheet.
You are always welcome to visit our factory.

2. Do you provide samples?

Yes, we provide samples and we have stock available.

3. What are your payment methods?

We accept T/T and L/C payments.

4. Will you provide Mill Test Certificate?

Yes, we conduct quality inspections for every batch of goods and provide Mill Test Certificate.

5. Do you support third-party testing companies?

Yes, we support third-party testing companies such as SGS and BV.

6. What is your minimum order quantity?

Our minimum order quantity depends on the product type and specifications.
Please consult our sales team for more information.

7. What is your delivery time?

Our delivery time depends on the quantity and requirements of the order.
Specific delivery times can be negotiated with our sales team.