Aluminium Zinc Az 150 Afp Galvalume Steel Coils Gl Zinc- Alloy for Roofing Sheets Materials

• Customization: Available
• After-sales Service: 24 Hours Online
• Warranty: 10-30 Years
• Model NO.: ASTM A653/JIS/SPCC/DX51D/SGCC
• Standard: ASTM, JIS, GB, AISI, DIN, BS
• Certification: ISO, RoHS, IBR
• Surface Treatment: Galvanized
• Technique: Cold Rolled
• Application: Container Plate
• Edge: Slit edge
• Stock: Stock
• Visit Factory or Not: Available
• Shipment: by Bulk or by Container
• Transport Package: Seaworthy Package
• Specification: Alloy; Zinc
• Trademark: FADA STEEL
• Origin: Shandong Province, China
• HS Code: 72106100
• Production Capacity: 3500000 Tons/Year

Product Description

Product Description

Galvalume steel coil is carbon steel coated with an alloy that combines the impervious properties of aluminum with the malleability and galvanic protection of zinc. The alloy coating gives galvalume steel coil and sheets a smooth, plain finish. It's another corrosion-resistant option, but it differs from galvanized steel as it combines aluminum and zinc coatings. This unique combination provides superior protection against rust and oxidation. Galvalume steel coil is renowned for its excellent heat resistance and long lifespan, making it suitable for roofing, cladding, and other architectural applications.It has wide usage, like making pipes, cutting sheets, making small tools, making corrugated sheets, making container, making fences, glass curtain walls, aluminum curtain walls as columns and stress materials, or for outdoor telecommunicatins towers, highways, other open-air construction steel and etc.. For the surfaces, there is zero spangle, regular spangle. It can be produced as customers' requirements. According to different usage, there are many techniques to satisfy the demand. For example, oiled, chromated and skin passed are the normal requirements. 

Galvalume Steel Coils (GL)

Width:	700MM - 1250MM
Zinc Coating:	AZ 20 - Z 180G/M^2
Thickness:	0.12MM - 1.5MM
Coil ID.:	508MM/610MM
Length:	As required
Type:	Coil/Sheet/Plate/Strip
Commercial Grade:	SGCLC, DX51D + AZ, ASTM A792 CS B
Structure Grade:	SGC340/400, G450/G550, SS37/SS40, S320GD/S350GD/S450GD

 

Detailed Photos

What is Anti-finger print?
The anti-fingerprint effect means that fingersprints on the surface cannot be seen at all by the naked eye, or only very slightly.Although the fingerprint is actually on the surface, it is essentially "invisible". Anti-fingerprint is a composite coating board obtained after anti-fingerprint treatment on the surface of galvalume steel. Fingerprint-resistant steel is the earliest material to pass the environmental protection certification. It is named "fingerprint-resistant" because the surface will not leave fingerprints when touched with clean fingers. The surfac of fingerprint-resistant steel is smooth and smooth with small tolerances. In the production process of home appliances, due to the requiremwnts of the process, many parts are touched by workers many times, and the sweat stains on the hands of the workers from pollution on the surface of the parts, which affects the appearance, so the research and development of anti-fingerprint.
There is many colors of anti-finger print liquids, such as blue, green, yellow, transparent, and etc., and you can have a reference as below:

 

 

Customers' Feedback

 

 

We factory has beening exporting to Africa, South America, Southeast Asia, West Asia and many regions all over the  world. All feedback are satisfied by customers. High quality products earn us good reputation. They are attracted by the high quality goods of our factoty and well after-sales service. That's why we can export a large sum of products always. That's because there are many trusted customers. We can provide 24-hours online service. If customers  face anything they can't handle, we have been always trying our best efforts to help them. 
 

Packaging & Shipping

1. Detailed pictures of package:

In order to assure the safety and to avoid rust problems, we factory use standard export seaworthy packng with waterproof paper winding, wooden cases or pallets, and PVC film via international express. Below are detailed process and pics for your reference:




1) Steps of package:
 

Step 1: The first layer of moisture-proof paper, overlap about 15 - 20cm at the contact.

Step 2: Plastic film fully wrapped.

Step 3: Outer ring 0.7mm, lining plate 0.3mm. Pure galvanized.

Step 4: Inner ring 0.8mm, 4*5 packing steel belt, gasket, packing belt clearance evenly distributed.

Step 5: Effect of side panel lining board.

Step 6: Finished, keep the whole volume clean, no handwriting, etc..

2. Detailed pictures of shipment:


 

Installation Instructions

 

Good equpiment can promise the products quality. In our factorry, we have many advanced and various equipments to assure that all performance index are according to the standard demand.

The Vickers hardness test was developed in 1921 by Robert L. Smith and George E. Sandland at Vickers Ltd as an alternative to the Brinell method to measure the hardness of materials. The Vickers test is often easier to use than other hardness tests since the required calculations are independent of the size of the indenter, and the indenter can be used for all materials irrespective of hardness. The basic principle, as with all common measures of hardness, is to observe a material's ability to resist plastic deformation from a standard source. The Vickers test can be used for all metals and has one of the widest scales among hardness tests. 
 

 

The B-UV-S is suitable for evaluating the relative durability of non-metallic materials such as paints, coatings, plastics, etc. by accelerated ageing tests with light and water exposure. It is particularly suitable for observing the destruction of physical properties of particularly durable materials, such as gloss reduction, colour fading, haze shading, strength reduction, chalking, cracking, blistering and embrittlement. It is also suitable for the food, pharmaceutical and cosmetic industries.

These equipments are just one of our factory facilities. If you want to learn more, we're always welcome you to visit our factory. We will provide well accompany to see all production lines and equipments.

 

Meetings with customers

During the past years, we have attended many fair in different countries, such as Dubai Big 5, Brazil Feicon Fair, Chinese Canton Fair, Foire internationale d'Alger, Expoperu Industrial and so much.

 

 

Company Profile

 

Shandong Fada Steel Co., Ltd. is located in Guanxian Industrial Park, Liaocheng City, Shandong Province. It mainly produces and processes Galvanized Steel Coil, Galvalume Steel Coil, Pre-painted Steel Coil, Corrugated Roofing Sheet and other high corrosion-resistant coated steel sheets. Our Company Is a Leading Manufacturer And Supplier Of Steel In China. Since 2016, Our products quality and price advantages enabled us to export to many countries and receive recognition from many customers. Our factory is a leading manufacturer and supplier of steel in China.Our products are sold in international markets such as Southeast Asia, Central and South America, Africa, etc., and have been recognized and supported by customers.
 

FAQ

1. Are you a factory or a trading company?

We are a factory that produces Galvanized Steel Coil, Galvalume Steel Coil,
Prepainted Steel Coil, and Corrugated Roofing Sheet.
You are always welcome to visit our factory.

2. Do you provide samples?

Yes, we provide samples and we have stock available.

3. What are your payment methods?

We accept T/T and L/C payments.

4. Will you provide Mill Test Certificate?

Yes, we conduct quality inspections for every batch of goods and provide Mill Test Certificate.

5. Do you support third-party testing companies?

Yes, we support third-party testing companies such as SGS and BV.

6. What is your minimum order quantity?

Our minimum order quantity depends on the product type and specifications.
Please consult our sales team for more information.

7. What is your delivery time?

Our delivery time depends on the quantity and requirements of the order.
Specific delivery times can be negotiated with our sales team.